8 – 67
Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
8
Electrical
ins
tallation
Electrical installation
Installing the wired remote control
3
3
4
3
2
1
1
Upper cover
2
Lower cover
3
Clearance 30 mm
4
Clearance 120 mm
1
Upper cover
2
Lower cover
3
Screw, M4 × 30
or M4 × 14
Minimum clearances to be observed for the wired remote control
➤
If necessary, open the monobloc unit as described in section 5 .1 .
Opening the wired remote control
➤
Remove the lower cover of the wired remote control by placing a flat-
head screwdriver or similar tool in the lower slots and carefully lever-
ing the upper and lower covers apart . Ensure that you don't damage
the housing .
➤
Remove the lower cover . Ensure that the protective tape between the
circuit board and the upper cover is not removed .
2
3
1