5 – 32
Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
Opening the device
Hydro module
➤
Remove two fastening screws from the bottom of the front panel and
one from the front of the front panel .
➤
Carefully pull the lower part of the front panel towards you, to release
the front panel from the left and right hooks, and remove the front panel .
➤
Reverse the procedure to assemble the device, ensuring that the right
and left hooks snap into place correctly .
5.2 Split systems: Hydro module
1
Screws
2
Hooks
3
Raise
Danger!
The work may only be performed by qualified or certified personnel .
Ensure that the entire power supply (e .g . power supply of the hydro
module, the storage tank, the electric immersion heater) is disconnected
before performing the steps below .
Removing the front panel
3
2
1
1
