Panasonic AJ-HPD2500E Скачать руководство пользователя

Страница: 222 / 236

222

For Long and Trouble-Free Operation: Error Messages

The following lists major warning messages displayed on the LCD monitor. For details on other warning messages, follow the

instructions given in the messages.

■

Error indication

These messages appear when malfunctions occur with the unit or an SD memory card. If the problem cannot be solved by

turning the unit off and turning it back on, try replacing the card as directed, or consult your supplier.

Continuous playback of multiple clips may not be smooth in the transition between clips.

In the following cases, playback may stop briefly in the transition between clips during continuous playback of multiple clips.

■

Multiple recording formats

Recording mode = PH mode

Playback format = 1080/60i (30P)

AVCHD warning information (when the AJ-YCX250G AVCHD codec board (optional) is
installed)

Message

Description

CANNOT BE USED DUE TO INCOMPATIBLE DATA.

This data conforms to a different standard and cannot be used.

CANNOT PLAY.

Cannot play.

CANNOT SELECT MORE CLIPS.

Too many clips selected to delete.

CANNOT SET. THE NUMBER OF INDEXES HAS EXCEEDED THE

MAXIMUM LIMIT.

Cannot make settings since the number of indexes exceeds the limit.

CARD ERROR. PLEASE REFORMAT.

Formatting failed. This card must be reformatted.

CHECK CARD.

Check the card.

CONTROL DATA ERROR HAS BEEN DETECTED.

A control data error was detected.

NO CARD

No card is inserted.

NO FILE.

The metadata file cannot be found.

REPAIR CLIP?

Repair clip?

THE CLIP IS PROTECTED. PLEASE CANCEL PROTECTION.

The clip is protected. Cancel protection.

THUMBNAIL DATA ERROR IS DETECTED.

A thumbnail data error was detected.

UNABLE TO FORMAT.

Cannot be formatted.

WRITE PROTECT

The card is write protected.

Message

Description

CANNOT RECORD

Indicates that an error occurred during shooting.

REC WARNING

Indicates that an error occurred during recording. Rerecord the card. If the warning still persists, contact your

supplier.

Turn the power off if the warning continues.

SYSTEM ERROR

TURN POWER OFF

Indicates that a system error occurred. Turn the power off and then turn it back on again.

If this message occurred during SD memory card access, for example when a clip was deleted, the SD

memory card may be damaged. Replace the SD card with a new one.

Use the AVCCAM Restorer, a repair utility, if this message is output during a repair.

➝

Refer to “Recovery of SD memory cards” (page 160).

Recording format
PH 1080/60i

Recording format
PH 720/60P

Recording format
PH 1080/60i

Plays back smoothly.

This format does not match
the playback format and will
not be played back.

Video stops briefly during
the switch between clips.

Содержание AJ-HPD2500E













































































































































































































































Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды

Panasonic AJ-HPD2500E, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды