Panasonic AJ-HPD2500E Скачать руководство пользователя

Страница: 112 / 236

112

Editing: Recording Voice-Overs

Press the PLAY LIST button to open the playlist

screen.

Press the A. DUB MODE (SHIFT + GOTO) button to

engage the voice-over mode.

“A.DUB” appears on the player screen in the voice-over

mode.

◆

NOTE:

• Use the A. DUB MODE (SHIFT + GOTO) button to exit the voice-

over mode.

Use the A1/A2/A3 (SHIFT + A1)/A4 (SHIFT + A2) buttons to

select track for voice-over. The names of selected tracks are

indicated in orange on the left side of the timeline. One or two

tracks can be selected. Selecting a third track will disable a

voice-over recording.

Find the starting point of the voice-over, and press

the IN + ENTRY button.

Use the operation buttons or the search dial to find the

starting point of the voice-over. Then, press the IN and

ENTRY buttons simultaneously to assign an IN point. The

IN button turns on.

Find the ending point of the voice-over, and press the

OUT + ENTRY button.

Use the operation buttons or the search dial to find the

ending point of the voice-over. Then, press the OUT and

ENTRY buttons simultaneously to assign an OUT point.

The OUT button turns on.

Press the REC button.

The P2 card is returned to start of set preroll time and

recording starts after preroll. Recording stops when the

OUT point is reached, an OUT POINT is registered again

by the OUT + ENTRY button during recording or the STOP

button is pressed.

Use the audio volume controls (VR) as necessary to adjust

the playback sound level.

◆

NOTE:

• It is possible to start voice-over recording without setting an

OUT point at step 2, if so required. The voice-over recording

then continues to the end of the timeline, or until the STOP or

OUT + ENTRY button is pressed.

◆

NOTE:

• When the 24PN playlist format is set in setup menu No. 026 (PLY LST

FMT), the audio IN and OUT points are set in 4-frame increments. If

the recording starts or stops elsewhere, the IN and OUT points are

automatically corrected to fall within the recording range.

• Starting the voice-over recording at the beginning of the timeline is

now allowed. Start recording at least 1 second from the beginning

of the timeline.

Starting voice-over recording

Setting recording tracks

Voice-Over after Assigning the IN
and OUT Points

1,2

Содержание AJ-HPD2500E













































































































































































































































Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды

Panasonic AJ-HPD2500E, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды