Panasonic AJ-HPD2500E Скачать руководство пользователя

Страница: 148 / 236

148

Connections: Connecting This Unit to a Network

Use the steps below to transfer data from an SD memory card

to an FTP server or write back data from an FTP server to an

SD memory card.

Open the thumbnail screen.

Press the MENU button.

Use the cursor buttons to choose [NETWORK] –

[EXPORT] – [SD CARD] and press the SET button.

◆

NOTE:

• The [SD CARD] menu appears only when an SD memory card

is inserted.

• SD memory card data can only be exported as full cards. Unlike

P2 cards, it is not possible to export selected clips.

The server screen appears.

Use the cursor buttons when the selected server folder

appears to select the folder that disk data will be

transferred to.

◆

NOTE:

• Folder names using multi-byte characters are not correctly

displayed.

• Pressing the EDIT MODE button will show the new folder added

to the list of current folders (regardless of cursor location).

Numeric characters indicating the date and time are

automatically entered for the name of the new folder. Use the full

keyboard to change it as required.

Note that some characters are not allowed in some FTP servers.

Folders with the same name as an existing folder cannot be

created.

Press the SET button to start exporting.

◆

NOTE:

• The number of files, their size, network status and other

conditions may lengthen the time required for exporting.

• To interrupt an export operation, press the SET button, select

[YES] in the cancel confirmation dialog that appears and press

the SET button again. The partially exported files remaining on

the FTP server are deleted if the network connection has not

been broken. If it has, incomplete files may remain on the FTP

server.

• When exporting starts, communications cut errors will no longer

be detected. Use the above procedure to interrupt an export

operation that has stalled.

• Since it is not possible to check the remaining capacity of the

FTP server, ask your FTP server administrator.

• Whether an error is generated when the remaining capacity of

the FTP server reaches 0 depends on the FTP server. If an error

is not generated, use the above procedure to interrupt

operation.

• An export of SD memory card data to an existing folder will

overwrite files that have the same path name as SD memory

card data without any warning messages.

However, if the path name is the same but the object differs

(folder or file), an error is generated.

• To prevent inadvertent overwriting, create new folders to export

data.

• To use SSH, the FTP server must be SSH compliant.

• Setting SSH to ENABLE will reduce transfer speed.

When the export operation ends, “COPY COMPLETED!”

appears.

Use the steps below to write back folders selected on a

network FTP server to an SD memory card.

Open the FTP explorer screen.

The folder screen of the FTP server appears.

When the selected server folder appears, use the cursor

buttons to move to the folder that will be imported.

Press the MENU button.

Use the cursor buttons to choose [OPERATION] –

[IMPORT] – [SD CARD] and press the SET button.

Press [OK] in the SD import confirmation dialog box that

appears to start writing back data to an SD memory card.

Transferring SD Memory Card Data

Transferring SD memory card data to the
FTP server (export)

Writing back clips from the FTP server
(import)

Содержание AJ-HPD2500E













































































































































































































































Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды

Panasonic AJ-HPD2500E, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды