Panasonic AJ-HPD2500E страница 41 Скачать руководство пользователя

Страница: 41 / 236

Introduction: Recording, Playback and P2 Card Handling

Intr

od
uc
tio
n

Recording, Playback and P2 Card Handling

◆

NOTE:

• When you use this unit for the first time, be sure to set the internal

clock in setup menu No. 069 (CLOCK SET) (page 185).

Turn on the POWER switch of this unit.

Insert a P2 card in a P2 card slot, and push it in until

the EJECT button pops out.

Flip the protruding EJECT button to the right.

• The P2 card access LEDs on this unit show P2 card status

when a P2 card is inserted.

➝

For details on P2 card status, refer to “P2 card access

LEDs and P2 card status” (page 42).

To start recording after a stop in the recording mode, press

the REC

button and the PLAY

button simultaneously.

Recording starts on the P2 card whose access LED lights

orange. Press the STOP

button to stop recording.

Press PLAY

to start playback.

Recording cannot be started from the thumbnail/playlist

mode.

➝

Refer to “Control Reference Guide” (page 22).

◆

NOTE:

• The P2 card access LED for a slot where a P2 card is inserted during

playback of a previously inserted card will remain off and the

second P2 card is not recognized. The second P2 card is

recognized when playback ends.

The continuous playback function, however, allows playback of all

the clips, including those in the P2 card inserted during playback.

➝

Refer to “Continuous Playback of Clips by Inserting/Removing P2

Cards” (page 61).

• While a clip is selected, a newly inserted P2 card will not be

recognized. The recorder will stay in this condition until the selected

clip is cancelled.

• A P2 card inserted in another slot during recording of a previously

inserted card will cause the P2 card access LED to flash and the

card will be recognized. Do not remove the P2 card from the slot

while it is being recognized.

• Removing or inserting P2 cards that are not being recorded during

recording on other cards may disrupt EE audio after recording but

will not affect the recording.

• P2 cards are played back and recorded in the following slot order:

➝

• When the power is turned on and the slot selected for recording at

the last power off contains the same P2 card, that slot will again be

selected for recording. If the slot does not contain a P2 card or

contains another P2 card, a card in a slot with the lowest number will

be selected for recording.

• When a P2 card becomes full during recording, a slot with a higher

number that contains a card with free space will be selected for

recording.

• Format P2 cards only on a P2 card device.

Insert a P2 Card

Recording and Playback

Содержание AJ-HPD2500E













































































































































































































































Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды

Panasonic AJ-HPD2500E, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды