Panasonic AJ-HPD2500E Скачать руководство пользователя

Страница: 149 / 236

Connections: Connecting This Unit to a Network

149

C
onn

ect
ion
s

◆

NOTE:

• To interrupt an import operation, press the SET button, select

[YES] in the cancel confirmation dialog that appears and press

the SET button again. Files that were not successfully imported

to an SD card are deleted, but successfully imported files

remain.

• When importing starts, communications cut errors will no longer

be detected. Use the above procedure to interrupt an import

operation that has stalled.

• The number of files in the selected folder and their size, network

conditions may lengthen the time it takes to write them back.

• Any files with the same path names on the SD memory card will

be overwritten without any warning messages. However, if the

path name is the same but the object differs (folder or file), an

error is generated.

• To prevent inadvertent overwriting, format the SD memory card

before importing.

• To use SSH, the FTP server must be SSH compliant.

• Setting SSH to ENABLE will reduce transfer speed.

When the import operation ends, “COPY COMPLETED!”

appears.

Before using a server function, perform the LAN setup and the

server settings required for the server you wish to use.

➝

Refer to “Network Settings” (page 139).

Press the MODE (SHIFT+REMOTE) button.

Use the cursor buttons to select [LAN] and press the

SET button.

“LAN” appears on the screen after switching modes.

To return to normal operating mode, press the

MODE (SHIFT+REMOTE) button again.

“MAIN MODE” will appear to indicate that you have

returned to the normal operating mode.

◆

NOTE:

• Operations including recording and playback are not available

in server mode.

• Although P2 cards can be inserted without problem in server

mode, removing a P2 card will result in an E-30 error message.

• SD memory cards cannot be accessed in server mode.

These services allow you to access P2 cards inserted in the

unit or hard disks connected to it from a PC connected to the

network.

They enable reading and writing of hard disks in the FAT

format and reading of hard disks in other formats and P2

cards.

■

FTP server service

The FTP server service allows you use a PC on the network to

transfer P2 card and hard disk clips to a PC using FTP

software.

■

Samba server service

With P2viewer you can check P2 card and hard disk content

from a PC connected to the network and transfer clips to a PC.

In case of an FTP server and Samba server, P2 cards and

hard disks are located in the following folders.

◆

NOTE:

• A “Printer and FAX” icon that may appear on a

connected via

Samba cannot be set up.

• Up to five clients can simultaneously connect to an FTP server.

• It may take some time to access using group names or host names

in Samba.

Using Server Functions

Switching to FTP, Samba or HTTP server
mode

FTP and Samba server services

P2 card:

/p2/slot1 - slot6

Hard disk (USB):

/usb/hdd_usb_01 - hdd_usb_23

Hard disk (eSATA):

/sata/hdd_sata_01 - hdd_sata_23

Содержание AJ-HPD2500E













































































































































































































































Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды

Panasonic AJ-HPD2500E, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды