Panasonic AJ-HPD2500E страница 206 Скачать руководство пользователя

Страница: 206 / 236

206

Setup: Time Code, User Bit and CTL

Engage the stop mode.

Use the COUNTER button to select [TC].

Set the TCG switch to [EXT].

(External time code selection)

Make the following settings in setup menu No. 507

(EXT TC SEL).

◆

NOTE:

• When SLTC and SVITC is set and an analog composite or SD

SDI input signal is selected, the VITC on the input video signal

is recorded.

• When setup menu No. 25 (SYSTEM FREQ) is set to 59-23, 60-24

or 60-25, setup menu No. 507 (EXT TC SEL) does not appear.

The unit is locked in SLTC in this mode.

• When setup menu No. 040 (VFR REC) is set to ON, REC RUN is

selected regardless of the TCG switch setting.

Engage the stop mode.

Use the COUNTER button to select [TC] or [UB].

Press the PLAY

button.

Playback starts and the time code appears on the display.

When the SUPER switch is set to [ON], the time code is

superimposed on the monitor.

■

Time code when no power is supplied

Also when no power is supplied, the backup function works

enabling the time code generator to provide long-term (about

one year) operation. Accuracy when no power is supplied is

about ±30 s per month.

◆

NOTE:

• Under the conditions listed below when the time code generator

advances regardless of operation mode, the backup function is

enabled.

- When the TCG switch on the front panel is set to “PRESET” and

setup menu No. 504 (RUN MODE) is set to “FREE.”

- When the TCG switch on the front panel is set to “EXT” and the

external time code set in setup menu No. 507 (EXT TC SEL) is

disconnected from connector on the rear panel.

• When settings in setup menu No. 25 (SYSTEM FREQ) are revised,

advance data is cleared.

Setting the external time code

EXT_L:

The LTC signal input to the TIME CODE IN

connector (BNC) on the rear panel is

recorded as TC.

SVITC:

The VITC signal attached to the serial signal

input to the SDI IN (HD) connector is

recorded as a time code.

SLTC:

The LTC signal attached to the serial signal

input to the SDI IN (HD) connector is

recorded as a time code.

Reproducing the time code and user bit

When the time code
signal cannot be
read, an asterisk (*)
is displayed.

“ ” : Field 1, field 3
“*” : Field 2, field 4

The colon between the seconds and the frames
changes to a period (.) in drop frame mode.

Содержание AJ-HPD2500E













































































































































































































































Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды

Panasonic AJ-HPD2500E, Руководство по эксплуатации

Результаты поиска

Содержание AJ-HPD2500E

Отзывы:

Похожие инструкции для AJ-HPD2500E

Бренды по названию

Популярные бренды