Page
143
of
248
When the output is
turned off
, the output is pulled up to the supplying voltage.
The digital output may be activated via several means.
Manually via command line. A command may be sent via LinkComm over USB, via an SMS, via an
Iridium message, or via any other means of connecting to the station.
Alarms: any sensor going into alarm may trigger the digital output.
Equations: any measurement setup with the Output function in an equation may pulse the digital
output for a specified amount of time. Please see section
The system can automatically activate the output based on alarms. The setting
Output1 Control
dictates
whether alarm activity triggers the output.
The setting
Output1 Control
can be set to:
Manual:
The system will do nothing with the digital output when it goes into and out of alarms.
Alarm In
: The system turns on digital output when any measurement goes into alarm. The system
does nothing with the output when it goes out of alarm.
Alarm In And Out
: The system turns on digital output when any measurement goes into alarm
and it turns off digital output when any measurement goes out of alarm.
LinkComm
has the Digital Output settings on the Other Setup dialog.
The controls in the
Digital Output DOUT
section can be used to view the status of the digital output, and
to control its state. Press the
Refresh
button to display the current state of DOUT. The current state is
displayed just above the button. Press the
ON
button to turn DOUT on. Press the
OFF
button to turn DOUT
off.
Command line
access to output 1:
Содержание SUTRON XLINK 100
Страница 1: ...Operations Maintenance Manual SUTRON XLINK 100 500 Part No 8800 1217 Rev 8 44 4 January 14 2022...
Страница 230: ...Page 230 of 248...
Страница 247: ...Page 247 of 248...
