Page
61
of
248
measurements are being
made
LinkComm is working
offline (not connected to
the station)
Press the button to connect to the station
The setup that is shown in LinkComm is not necessarily the same setup that is in a
connected the station
To read a setup from the station and show it in LinkComm, you may either use the
as described in the previous section, or select the
Get Setup From the station
item from
the main menu
To give a setup created by LinkComm to the station, you may either use the
as described in the previous section, or select the
Send Setup To the station
item from the main
menu
menu item is selected, or the Send Setup to the station
button is clicked, none of the changes made to the setup in LinkComm will be in the
station!
6.5.3
Handling Setup Differences Following Setup Send
On some occasions, LinkComm will detect that differences remain after sending setup changes to the
station. This can happen because of a communication error, but more commonly, it occurs because the
station doesn’t allow certain changes to occur remotely.
In any case, when LinkComm detects such a difference exists, LinkComm warns you that changes still exist,
and will offer a dialog to “View Differences”. To rectify the situation, it is usua
lly best to get the setup from
the station to again be “in
-
sync”, and then try making and se
nding your changes again.
6.5.4
Setup Files
You can save a station setup to a file and later re-use that setup by loading it into LinkComm. To save a
station setup to a file, select
Export setup…
from the main menu.
You may find it helpful to save reference copies of setups outside of LinkComm, as a backup in case you
accidentally overwrite changes to the setup in LinkComm. Use the export setup menu item to achieve this.
To load a station setup from a file, select
Import setup…
from the main menu. After loading the setup file,
you still need to send the changes to the station. As always, use either the
, or the
Send Setup to Station
menu item, to send the setup to the station.
Содержание SUTRON XLINK 100
Страница 1: ...Operations Maintenance Manual SUTRON XLINK 100 500 Part No 8800 1217 Rev 8 44 4 January 14 2022...
Страница 230: ...Page 230 of 248...
Страница 247: ...Page 247 of 248...
