OTT HydroMet SUTRON XLINK 100 Скачать руководство пользователя страница 80

Страница: 80 / 248

Page

248

where

<station>

is the name of the station and

<date>

is the current date in yyyymmdd format (e.g.:

"20160204")

Output files are always placed under the full path and given a unique name by appending _01, _02, _03,
..., _99 to the name as necessary.

Regarding Events



By default, plugging in a USB drive will results in only measurement data being downloaded to the
log file. Events are excluded from the log file.



If the following file is located on the USB drive, then the system will download both measurement
and event data:



\Sutron\XLink\IncludeEvents.txt



The file content does not matter. If the file is on the drive, in the specified path, the system
will download both measurements and events.



The rules above apply to software 8.24 and newer. Older versions will always download
both measurements and events to the log file.

Regarding Headers



Logs are downloaded without a header to ease import of log files into other systems.



If the following file is located on the USB drive, then the system will include a header in the
downloaded log file:



\Sutron\XLink\IncludeHeader.txt



The file content does not matter. If the file is on the drive, in the specified path, the system
will download both measurements and events.



The rules above apply to software 8.33 and newer. Older versions will always download
both measurements and events to the log file.

Regarding SD Cards

By default, the lo

g download is done from the station’s on

-board flash memory to the USB drive.

If the station is equipped with an SD card, the log is automatically backed up to the SD card. Because the
SD card may provide more storage space than the on-board flash memory, you may choose to copy the log
data from the SD card instead.

The setting

USB Drive Gets Log From

may be changed to

SD Card

to have the log data copied from the SD

card to the USB drive.

Files Created on the USB Drive

The files created when the USB drive is plugged in include:



log data (ex: "TestStation_log_20161231_02.csv")



diagnostic data (ex: "TestStation_diag_20161231.txt")



setup files (ex: "TestStation_setup_20161231.txt")



results from setup import (ex: "TestStation_setup_results_20161231.txt")



output from script execution (ex: "TestStation_script_results_20161231.txt")

Содержание SUTRON XLINK 100

























































































































































































































































Результаты поиска

Содержание SUTRON XLINK 100

Отзывы:

Похожие инструкции для SUTRON XLINK 100

Бренды по названию

Популярные бренды

OTT HydroMet SUTRON XLINK 100, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SUTRON XLINK 100

Отзывы:

Похожие инструкции для SUTRON XLINK 100

Бренды по названию

Популярные бренды