Page
130
of
248
FTPS is also supported
–
enable the
Secure
option to use FTPS.
The system supports explicit FTPS.
HTTP
The station may deliver data to Hydromet Cloud using HTTP or HTTPS. Enable the
Secure
option to use HTTPS.
SMS
If
Tx Mode
is set to
SMS
, the station will send transmission data via SMS (text messages) to
up to three telephone numbers, as specified by
SMS Tx Phone
.
Main Server and Backup Server
If the station is setup to deliver data to a server, the system will use the modem to get an internet
connection. Once the connection is established, the system will connect to the
Main Server
in order to
deliver data. Failing that, it will try the
Backup Server.
A transmission is considered a success if either of
those servers receives the data.
The server may be expressed as a name (such as www.HydrometCloud.com) or an IP address (such as
10.0.0.1).
To deliver to more than one server, setup multiple transmissions for cell telemetry, each with a different
Main Server
.
To not use a
Backup Server
, leave the field blank.
Server Port
What port to connect to on the
Main and Backup Servers.
Note that both FTP and FTPS traditionally use
port 21, FTPS uses 990, HTTP uses 80, and HTTPS uses 443.
Server Username
If a login is required on the server, please enter it here. FTP traditionally requires a username. TCPIP
protocols do not use the username. If a name is not required, leave the field blank.
Server Password
If the
Main and Backup Servers
are protected by a password (sometimes called a shared secret), it must be
entered in this field. If it is not, the station will not be able to deliver sensor data.
If the server does not provide password protection, leave this field blank.
Server Path
HTTP communications require that the correct path be set.
If you are using Hydromet Cloud, the path will be provided once a Hydromet Cloud account is
setup. Only HTTP uses this setting.
If you are using Hydras, please use the path provided when the Hydras account is setup. You
must include either the ws or the uid that was provided. Here are two examples of valid paths:
/ottml.htm?uid=XLINK
Содержание SUTRON XLINK 100
Страница 1: ...Operations Maintenance Manual SUTRON XLINK 100 500 Part No 8800 1217 Rev 8 44 4 January 14 2022...
Страница 230: ...Page 230 of 248...
Страница 247: ...Page 247 of 248...
