OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 174 / 181

Decimal
Value ASCII
Char Decimal
Value ASCII
Char Decimal
Value ASCII
Char Decimal
Value ASCII
Char
053 5 077 M 101 e 125 }
054 6 078 N 102 f 126 ~
055 7 079 O 103 g
Backing up the card validation data allows for the safeguarding of this information and to minimize system
downtime when modifying or repairing aFSC3000
™
. Data from one FSC3000
™
can be backed up and
restored to another FSC3000
™
. FSC3000
™
systems need to have the same database.
The BACKUP and RESTORE commands must be included as part of a computer program that can format,
store and transmit the raw computer data produced by the FSC3000
™
.
The Phoenix
®
for Windows
®
software package from OPW Fuel Management Systems provides all the
information needed to back up and restore card data quickly and easily using an IBM
®
-compatible personal
computer.
Phoenix
®
is available from a distributor or directly from OPW Fuel Management Systems.
BACKUP/BACKUP Card Commands
These privileged commands transmit card and account data from the FSC3000
™
database to an external
computer.
From an external computer, the
BACKUP
commands request FSC3000
™
to transmit site id, card and
account field code(s), checksum, carriage return and a line feed (‘
|CR|LF|
’), all separated by a slash (‘/’).
The records themselves are then sent following each ‘
|CR|LF|
’ sent by the external computer. After the last
record, the FSC3000
™
sends ‘
//|CR|LF|
’.
l
If NO card number is specified, backup starts transmission at the first card/account record
l
If a card number is specified, the transmission starts at the specified record. Because the records are
sorted by number, this command allows for the backup of a latter portion of the file.
Card and account records are sorted only by number; that is, account 2222 would be between card 1111 and
card 3333. The
BACKUP
commands back up both record types.
There is no command to specify only card or only account.
The following is an example of the information exchanged with the ‘
BACKUP
’ command.
In this example, ‘STATION12345’ is the site ID and ‘44’ is the checksum. The ‘-‘ indicates a “space pad.”
Card and account records are sent as single strings. For clarity, the example above shows line breaks
between fields.
RESTORE site id (/fields) (/checksum)
This privileged command loads card and account information from an external computer to the FSC3000
™
database.
The SITE ID, CARD or ACCOUNT numbers (field “a”) and RECORD TYPES (field “b”) must be specified.
Specify any additional field codes to be restored (see Restoring Fields below). Also include a checksum for
the command line and/or data records.
Doc. No.: M00-051.00 Rev.: 10
Page 174 of 181