OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 142 / 181

15.4.1.1 (0=Local)
For networks that provide these two prompts, a special feature is available for customers who have a private
fueling location and their employees/fleet carry a particular network card for fueling when on the road. By
setting the “Max Online Qty” to zero and then setting the “Max Offline Qty” to the max amount desired at the
dispenser, any card swiped for that network will be authorized for fuel after the configured prompts are
entered, without authorization to the host. This feature allows controlled fueling without the overhead of
network charges for dispensing your own fuel or the need to manage a proprietary card file. For further
protection, the fleet record can be configured for your network account number to make sure that network
cards not affiliated with you
cannot fuel.
NOTE:
If a modem or IP Converter is connected to the host port, the FSC will attempt to
capture those transactions when fueling is complete.
Enter MAX ONLINE Qty (0=Local): 0
Enter MAX OFFLINE Qty: 250
15.5 ISO Table
The ISO table used on the FSC is specifically design for the processing of bankcard and private fleet cards
under the networks; Buypass, NBS Bank, NBS Quarles and Paymentech. Other networks that process
MasterCard Fleet cards require the MasterCard Fleet card ISO table to be “Activated” before those cards will
process to their specific network.
For any card to process to a bankcard host, it must be activated in the ISO table. Along with the controlled
activation of cards, the ISO table also provides the merchant/site owner the ability to set the maximum dollar
auth amount, product restriction and control of bankcard security code prompting.
Use the SET ISO command to configure the FSC ISO table.
ISO table for Bank, Fleet and Private Label card configuration
Cards defined as active are only processed under:
--CFN, TCH (MC Fleet Only), BUYPASS
The above line, indicates which networks rely on at least one card to be activated for use.
The section below is specific the Buypass network. When enabled the customer MUST agree to the terms
defined or card authorization limits cannot be modified beyond their cold start defaults.
!!! IMPORTANT !!! Due to Buypass host processing rules, INCREASING
the default "Authorization Amount/Max Fueling Limit" value for bankcards
may result in additional charges and penalties from your credit card issuer
or bank. You as the site operator may incur chargebacks on transactions
when proper funds are not available.
See M00-051-00 FSC3000 Command-Line Configuration Guide for more information.
For the following select:
(A) to Accept.
(D) to Decline, all bankcard fueling limits be set to default.
(I) to Ignore, current limits will be retained without edit.
Currently: DECLINED
Do you as the Site Operator/Technician ACCEPT financial responsibility for
this Liability of chargebacks when changing the max fueling limits? (A/D/I):
Doc. No.: M00-051.00 Rev.: 10
Page 142 of 181