OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 158 / 181

16.4 Transaction Searches (network)
Print/Show Transaction where status = <Verbal CATEGORY>
Verbal CATEGORY Description
Authorized Authorized by network, still not captured
Captured Captured by network
Declined Authorization denied by network
Failed Authorized by network, but rejected on capture
Local Authorized by the FSC, Still not captured
Print/Show Transaction where status = <code CATEGORY><:#> (# = a:123456)
CODE CATEGORY Description
a Authorized by network, still not captured
A Authorized by FSC, still not captured
B No allocation from network
q Authorized by network and captured by network
Q Authorized by FSC and captured by network
! Authorization denied by network
i Authorized by network, but rejected on capture
I Authorized by FSC, but rejected on capture
C Too many re-prompt attempts
v Failed Reversal
V Auth Request Reversed
16.4.1 Clearing Transactions
Clear Transaction <mmm dd,yyyy> Sequence <#>
Clear Transaction (all)
NOTE:
Phoenix
®
users should have Phoenix
®
set up to clear transactions. Using the above
commands to clear transaction commands may cause Phoenix
®
to lose transactions.
This applies to ANY polling package.
USB Key users.
TheFSC3000
™
will write transactions to the USB Key in the K2500 .TRN format.
If the K2500 .TRN already exists then the controller will append to the file.
Doc. No.: M00-051.00 Rev.: 10
Page 158 of 181