OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 150 / 181

NOTE:
To help protect the user from misconfiguration, the two device type entries are only
available from the command line and are not configurable under ARTWare setup.
Setup Options 2-4
These values are mainly used for reference and don’t directly affect site operation. They are passed from
ARTWare under the site setup information and sent to all enabled networks that are the same.
5. Redial Attempts
The Redial Attempts option defines how many times the system will try to connect to the network. Default is 1.
6. Connect Time
The Connect Time option defines the maximum time to stay connected to the network when trying to approve
a card. If this time is reached, the transaction will be terminated.
7. Local Authorization
This feature is not supported by the ComdataPOS host and is therefore disabled in the FSC. If selected, this
option will display:
“Sorry, LOCAL AUTHORIZATION is not allowed for ComdataPOS
host”
8. Network System (ON/OFF times)
The Network System option defines when network cards can be processed (default 24 hours).
9. Authorization Message
The authorization message is displayed after the card has been approved. The network for processing and
the host itself does not provide an authorization message.
10. Re-prompt Time
The Re-prompt Time setting defines how long the system will look back for transactions with the currently
swiped card. If a transaction is found, the system will populate certain fields with the same information as
before. This setting is useful, for example, when a driver forgets to bring his odometer and must go back to
get it. By then the transaction has terminated, he would just re-swipe the card and verify displayed
information.
11. Communication Parameters
The Communication Parameters option defines the network communication parameters. Buypass default
setting is 2400 baud, 8 data bits, parity - none, 1 stop.
12. Process … Market MC?
Comdata supports two different sets of MasterCard Fleet ISOs. One is designated for use in the US market
and the other for use in Canada. This option allows you to enable which of the MasterCard Fleet card types
you want to process. Depending on your sites location, it is suggested that you confirm with Comdata which
card types are acceptable for processing before enabling an outside market MasterCard.
IMPORTANT:
To maintain PCI compliance in the FSC, you
MUST
enable the MasterCard
Fleet card record in the ISO table to complete the setup for the processing of Comdata
MasterCard Fleet cards.
Doc. No.: M00-051.00 Rev.: 10
Page 150 of 181