OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 25 / 181

Section 4 Time Management
4.1 Set Time
To Set Time type:
Set Time <ENTER>
Enter time (XX:XX AM/PM): (May enter in 24 hour or AM/PM format)
4.2 Set Date
To
Set Date
type:
Set Date <ENTER>
Enter Date (MMM DD, YYYY): (Month is entered as APR for April, JUN for June, etc.)
4.3 Set Time Change
NOTE:
Time changes are not automatic in the FSC3000
™
. Time changes must be set up
using the steps below.
To
Set Time Change
type:
Set Time Change <ENTER>
Enter date when time is moved BACK 1 hour: Inactive
Enter date when time is moved FORWARD 1 hour: Inactive
BACK 1 hour: INACTIVE
FORWARD 1 hour: INACTIVE
4.4 Set System Time
To Set System Time type:
Set System Time <ENTER>
Set system ON time (Y/N)? N
Set system OFF time (Y/N)? N
Set 'RECEIPTS ONLY' time (Y/N)? N
Set time adjust (Y/N)? N (Enter N for this)
NOTE:
This feature allows an offset in seconds (a plus or minus value) applied at midnight to
account for system clock drift.
4.5 Set Light
To Set Light Time type:
Set Light <ENTER>
Enter light ON time: Inactive
Enter light OFF time: Inactive
Light ON time: Inactive
Light OFF time: Inactive
NOTE:
This setting applies to the Lighted keypad and card reader on supported terminals
Doc. No.: M00-051.00 Rev.: 10
Page 25 of 181