OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 147 / 181

15.6 Set ISO - Buypass (Firstdata)
ISO table configuration is the same as described under "ISO Table" on page 1 .
For FSC3000
™
version 1.16a or higher, the ISO table setup has changed when the Buypass network is
enabled. This new feature has been added to make sure that the site owner and installing technician are
aware of the financial liability involved with changing the “Authorization Amount/Max Fueling Limit” setting in
the ISO table for the processing of bankcards. OPW has found that due to the way in which the Buypass
network supports the processing of one dollar ($1) authorizations, there is the potential for chargebacks on
transactions when you increase this fueling limit beyond their cold start defaults.
IMPORTANT: To protect all parties involved, the following acceptance and control has been
added to the ISO setup to ensure that a conscious decision is being made to accept the
liability involved before moving forward. The site owner must accept this agreement before
being allowed to change the system defaults. If at any time a “Decline” of the agreement is
selected, the FSC will restore bankcard card limits to their default values.
NOTE:
As of ARTWare version 3.9 this same agreement is in place when the Buypass
network is enabled for the site being configured. If the user does not accept that agreement
within ARTWare the FSC will again revert the current fueling limits to their default values.
ISO Table Agreement:
P>set ISO
ISO table for Bank, Fleet and Private Label card configuration
Cards defined as active are only processed under:
--ComdataPOS (MC Fleet Only), T-CHEK (MC Fleet Only), TCH (MC Fleet Only, BUYPASS
!!! IMPORTANT !!! Due to Buypass host processing rules, INCREASING
the default "Authorization Amount/Max Fueling Limit" value for bankcards
may result in additional charges and penalties from your credit card issuer
or bank. You as the site operator may incur chargebacks on transactions
when proper funds are not available.
See M00-051-00 FSC3000 Command-Line Configuration Guide for more information.
For the following select:
(A) to Accept.
(D) to Decline, all bankcard fueling limits be set to default.
(I) to Ignore, current limits will be retained without edit.
Currently: DECLINED
Do you as the Site Operator/Technician ACCEPT financial responsibility for
this Liability of chargebacks when changing the max fueling limits? (A/D/I):d
Default fueling limits restored for bankcard records!
ß
Note: Decline chosen!
Doc. No.: M00-051.00 Rev.: 10
Page 147 of 181