OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 78 / 181

NOTE:
The “Avg PCF Options” counts are based on the following card file options being
enabled:
Account #'s
DailyAllocation
Card PIN with: Card INVALID after 3 BAD PIN Entries
Product Restriction
Quantity Restriction
Driver / Vehicle / Account Name
Additional Prompts (Prompt-Seq.)
12.4 Set Card Buffer (option 1) – Card/Transaction Size
The next step is to set the number of transactions to be stored. The system will display the maximum number
of transactions that can be stored based on the transaction level that was purchased. The next step will be to
set the card/account size.
To set up Card/Tran buffer type:
Set Card Buffer <ENTER>.
1. Specify Card/Tran buffer size
2. Define Card/Account record
3. Clear Card Record Totals
4. Reconcile Card Record Allocation
5. Clear All Account Record Totals
6. Reconcile Account Record Allocation
7. Month End Totals
8. Additional Options
9. Card Record Placement -Buffer A in SIMM 1
10. Trans Record Placement -Buffer B in SIMM 1
X. Exit
Enter Choice: 1
NOTE: Transaction and Message Buffer will be CLEARED!! (Y/N)? Y
Enter # of transactions to be stored (max 2000): (Enter the number that is
displayed)
#NOTE: Transaction buffer will be CLEARED!! Are you sure (Y/N)? Y
Enter # of cards to be stored (max xxxxx):
1. Specify Card/Trans buffer size
2. Define Card/Account record
3. Clear Card Record Totals
4. Reconcile Card Record Allocation
5. Clear All Account Record Totals
6. Reconcile Account Record Allocation
7. Month End Totals
8. Additional Options
9. Card Record Placement -Buffer A in SIMM 1
10. Trans Record Placement -Buffer B in SIMM 1
X. Exit
Enter Choice:
Doc. No.: M00-051.00 Rev.: 10
Page 78 of 181