OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 20 / 181

Enter number of days allowed (15 max): 15
USER "Tech" has been successfully created!
2.2.2 Delete User
The
Delete User
option allows for the deletion of users from the system.
2.2.3 Show User(s)
The Show Users option displays all users defined in the system. If the user was defined as a limited-time
user, the user’s remaining time will also be displayed.
Select “Administrator” option or press [ENTER] to exit: 3
User1: Tech - (limited time access: 1 day)
2.2.4 Change Passwords
The
Change Passwords
command changes the passwords for
Remote Login
,
Partial Access
,
Administrator
and all defined
Users
.
2.2.5 Clear Event Log
The
Clear Event Log
option clears the system log. Refer to Show Log (Saving Log) and the “M030001
PA1-PA-DSS Implementation Guide” before clearing the system log.
2.3 System Start
The
System Start
command is a one-time command that activates the FSC3000
™
system, allowing
transactions to be processed. Before this command can be performed, the “SET ADMIN” command (option 4)
must be used to change the factory default passwords.
Type:
System Start <ENTER>
2.4 Password Recovery
Due to the requirements of PA-DSS compliance, password recovery is no longer available. It is up to the
system owner to secure the passwords. If the Administrator password is lost, the FSC3000
™
system will
require a cold start and must be reprogrammed to regain Admin access.
Doc. No.: M00-051.00 Rev.: 10
Page 20 of 181