OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 125 / 181

15.3.10 Paymentech
NETWORK option settings NETWORK : Paymentech
1 - Client #....................... 1234 (Provided by Paymentech)
Merchant #..................... 123456789012 (Provided by Paymentech)
Terminal #..................... 001 (Provided by Paymentech)
2 - Site Name......................
3 - Site City......................
4 - Site State.....................
5 - Redial Attempts................ 1
6 - Connect Time......(Seconds).... 30
7 - Local Authorization............ Disabled
8 - Network System................. ON
ON............................. 12:00 AM
OFF............................ 12:00 AM
9 - Authorization Message.......... ^0^FHAVE A SAFE TRIP
10 - Re-Prompt Time....(Minutes).... 10 (set to zero for DTC systems)
11 - Communication Parameters....... 2400 7E1 T60Y
12 - Reset ISO table to defaults ?..
13 - Force Bankcard Security Code .. Yes
Training Screens Active ? ..... Yes
ON...(Active: Yes)............. 12:00 AM
OFF............................ 12:00 AM
14 - AVS Prompting for Bankcards.... Zip Code:Yes
Billing Addr\House # prompt.... House #:Yes
AVS prompts Deterrent ONLY..... Yes
Enter option number or press [RETURN] to exit:
1. Client #, Merchant # and Terminal #
When processing transactions to Paymentech there are three pieces of information provided by the network
when boarded. Based on the protocol used, these values are expected to be a specific length where; Client #
is 4-digits, Merchant # is 12-digits and Terminal # is 3-digits (typically assigned as “001”).
1-4. Setup Options 1-4
Options 1- 4 should be set up with information from the network. The Technician should contact the Merchant
for information.
5. Redial Attempts
The Redial Attempts option defines how many times the system will try to connect to the network. Default is 1.
6. Connect Time
The Connect Time option defines the maximum time to stay connected to the network when trying to approve
a card. If this time is reached, the transaction will be terminated.
7. Local Authorization
The Local Authorization option allows configuration of processing rules if the FSC can authorize network
cards offline down the host is down. Not all networks support this feature. If you enable Local Authorization
for a specific host you should first confirm with the host that this feature is allowed for the specific site.
NOTE:
Depending on the host being configured different options may be presented.
Doc. No.: M00-051.00 Rev.: 10
Page 125 of 181