OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 151 / 181

NOTE:
If you
Do Not
enable this option under Comdata and also have a bankcard host
enabled on the FSC, the Comdata MasterCard Fleet cards will process via the enabled
bankcard host and the FSC will only prompt for those entries encoded on the track2.
15.8 Set Fleet – ComdataPOS
As of version 1.16a, fleet table support for the ComdataPOS has been changed to provide more control over
max quantity and dollar fueling limits.
P>set fleet
# ? Fleet/Acct Name Prompt Seq Primary Secondary Onlin Offln A B
1 0
2 0
3 0
4 0
5 0
: : : :
20
ENTER (fleet table row # (1..20) or [RETURN] to exit) : 2
2
(0=None, 1=ComdataPOS, 2=T-CHEK, 3=EFS, 4=TCH, 5=FleetOne, 6=BUYPASS)
Enter NETWORK: 1
Enter PRIMARY #: 18004564799
Enter SECONDARY #:
Enter MAX Quantity Limit: 600
Enter MAX Dollar Limit: 900
When using the Comdata POS, host-processing limits are provided in both max quantity and dollar limits.
The values entered here are site-overriding values. These values are intended to give the site owner control
over the maximum amount of fuel that any driver can take when processing a Comdata Comchek or
MasterCard Fleet card. This limits the driver to an amount lower than what Comdata will allow for the drivers
card. If you don’t have a need to limit the driver and want Comdata to determine the maximum amount of fuel
that can be taken, set these limits high so the host can then lower the limits as required by the card.
To display the max quantity and dollar amounts in the fleet table, the Online (Onlin) and Offline (Offln)
columns of the Fleet table are used to display these values.
NOTE:
In the example below the ‘A’ and ‘B’ columns display a “Qty” string and a dollar sign
(‘$’) to help identify the respective columns in which the values are shown.
Doc. No.: M00-051.00 Rev.: 10
Page 151 of 181