OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 58 / 181

8.3 Prompts
8.3.1 Standard Prompts
The Standard Display Messages guide the customer through the fueling process with a series of prompts.
These prompts can be changed as needed, but their functionality cannot. When the customer first
approaches the terminals, the terminals will display as follows:
System Open – Display #8 & #9 alternating
System Closed Receipts only – Display #6 & #7 alternating
System Closed – Display #10
NOTE: DTC does not support alternating system open. It only supports displaying 8.
To format a display type:
Format display # <ENTER>
Format Display 8
LANGUAGE 1 DISPLAY# 8:
^1^L PETRO VEND^M FUEL CONTROLS
Insert a 2 line Display Message (Y/N)? N
|Lang 1 |
^1^L PETRO VEND^M FUEL CONTROLS
NOTE:
Use “SHOW PROMPT” to see additional prompt setup. Void is not recommended and
OPW shall not be responsible for communication issues.
8.3.2 Format Display Default
The
Format Display Default
command provides the ability to reload the default display and additional
prompts without cold starting the FSC3000
™
. All previous changes made to the prompts will be completely
cleared.
To set Display Type:
Format Display Default <ENTER>.
Display TYPE Options:
0 - NO Change
1 - 2x16
2 - 1x40
3 - 2x40 (Graphics)
ENTER OPTION: 3
DISPLAY: 2x40 - (GRAPHICS)
NOTE:
Sometimes this command must be done twice for the additional prompts to change.
Doc. No.: M00-051.00 Rev.: 10
Page 58 of 181