OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 101 / 181

11. Communication Parameters
Host communication parameters are set as needed on cold start. If a network is added after installation its
parameters may need to be changed. If an Abierto/Systech IP Convertor is in use contact OPW Tech Support
for preferred settings.
CFN – Baud 1200 or 2400, 8 data bits, No parity, 1 stop. If using satellite, the baud rate can be configured at
9600 baud if needed.
12. Call Statistics
For Reference Only – The Call Statistics option provides the number of Answered, Failed, Busy
connections and the connection time. This will reset with every new batch.
13. Additional Cards Processed
This option allows for the processing of additional cards on the CFN network. It is recommended that
merchant/site owner check with a CFN representative to determine which cards can be enabled for
acceptance.
NOTE:
To process T-Chek MasterCard Fleet and ISO based cards, they must enabled in the
ISO table.
When ISO cards are enabled and a bankcard host is in use, those cards listed above will process to CFN.
14. Connect After Prompts Complete
When CFN cards are swiped, the network will start the authorization process while the prompting is taking
place. When CFN is authorizing by TCP/IP, the connection is too fast and CFN will drop the connection if the
customer is taking too long to enter prompts. For CFN transactions to be authorized after prompting
completes, set to “yes."
15. Host Status
This option enables the CFN network for processing. This only has to be executed once.
16. Price/Total on Orig/Legacy Cards
This option enables the printing of price and total on receipts for original and legacy CFN cards.
NOTE: This supersedes the Option 13 “Print Price and Totals on Network Receipts” under
the general network setup.
Doc. No.: M00-051.00 Rev.: 10
Page 101 of 181