OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 159 / 181

16.5 Pump & Fuel Reports
Print/Show Fueltype # Totals (leave # out for all fuel types)
Print/Show Pump # Totals (leave # out for all pumps)
Print/Show PCT # Totals
Clear Pump # Totals
Clear PCT # Totals
Print Show Midnight Totals
IMPORTANT:
Midnight Totals are generated from the currently stored transactions on the
FSC. If transactions are cleared, the Midnight Totals will not fully reflect the true totals for the
day.
16.6 Transaction Terminations/Denials
When a transaction is generated, the system records how the transaction is denied or terminated. If the
transaction was started but never got to the “use pump” prompt, the transaction will be terminated with a
reason for denial. If the pump was authorized, then the transaction will terminate with a reason for
termination.
There are two ways to get the denial/termination code. The first method is to connect to the FSC3000
™
and
use the “show transaction command”. If the specific transactions are known “show trans xxxx (xxxx =
transaction #)” command can be used. The FSC3000
™
will display transactions as below. To the right of the
transaction is the journal printout example. This is the second method if the site is equipped with a journal
printer.
Show Transaction Command Journal Printer
SEQUENCE# 3
REASON FOR DENIAL
USER ENTRY TIME-OUT
ß
Denial
0022e04MAR05
1 Code 12:17A 1
DRIVER TEST
DATE MAR 04, 2005
TIME 12:17 AM
TRANSACTION # 22
CARD # 1
RECEIPT NOT ISSUED
ACCOUNT # 0000
REFER FUEL Y/N NO
SEQUENCE # 1
Show Transaction Command Journal Printer
SEQUENCE # 1
REASON FOR TERMINATION
NORMAL
ß
Termination Code
0012I 20FEB05
01:28A 1
DRIVER TEST
DATE FEB 20, 2005
TIME 01:28 AM
TRANSACTION # 12
Doc. No.: M00-051.00 Rev.: 10
Page 159 of 181