OPW M00-051.00 FSC3000, Руководство по настройке через командную строку

Страница: 164 / 181

Code Description Cause Possible Solution
O
(01)
Communication
error
The Transaction was terminated because
communications was lost with the pump
controller
Verify communication
wiring is properly
installed
Verify site power
conditions
Q
Disconnect
VIU Timeout VIU was not detected by VIT for too
long of a period
VIT pump nozzle ring not
properly mounted
Increase timeout if
fueling satellite tanks.
R
Pump Error -
DPC COM FSC is encountering DPC communication
problems to the dispenser.
Check wiring from FSC3000
to pumps and/or
distribution box
S
Pump Bypass
Override
We provide a feature that allows
the FSC to record fuel while a
pumpis in Bypass mode. This ter-
mination code almost always has
fuel taken.
U
Pump Activ-
ation
Timeout
The pump controller did not
respond to the command to activate
the pump within the allotted
time.* Make sure the software
version in the pump
controller is up to
date.
Z
Manager
activated Pump was authorized using the pump
on command in the FSC
* This indicates that the FSC terminated and closed an open pump state due to an internal timer on the FSC
designed to be a pump watchdog (more for mechanical pumps). This protects against a rogue pump that may
have never gone hot while the FSC thinks it did. Typically these are zero quantity transactions. HOWEVER;
as a side effect when electronic dispensers are in use and being controlled by our UPC or DPC controllers, if
a driver never hangs the hose a valid transaction with fuel can be terminated with quantity.
Doc. No.: M00-051.00 Rev.: 10
Page 164 of 181