![background image](http://html1.mh-extra.com/html/omron/nx1p2-series/nx1p2-series_hardware-user-manual_742226018.webp)
WARNING
WARNING
During Power Supply
Do not touch any of the terminals or terminal blocks while the power is being supplied.
Doing so may result in electric shock.
Do not attempt to take any Unit apart.
In particular, high-voltage parts are present in the Power Supply Unit while power is
supplied or immediately after power is turned OFF. Touching any of these parts may
result in electric shock. There are sharp parts inside the Unit that may cause injury.
Fail-safe Measures
Provide safety measures in external circuits to ensure safety in the system if an abnor-
mality occurs due to malfunction of the CPU Unit, slaves, or Units or due to other ex-
ternal factors affecting operation. Not doing so may result in serious accidents due to
incorrect operation.
Emergency stop circuits, interlock circuits, limit circuits, and similar safety measures
must be provided in external control circuits.
The Controller outputs may remain ON or OFF due to deposition or burning of the out-
put relays or destruction of the output transistors. As a countermeasure for such prob-
lems, external safety measures must be provided to ensure safe operation of the sys-
tem.
The CPU Unit will turn OFF digital outputs on the CPU Rack in the following cases.
• While the CPU Unit is on standby until RUN mode is entered after the power is
turned ON
• If an error occurs in the power supply
• If a system initialization error occurs
Digital outputs on the CPU Rack will produce outputs according to the settings in the
following cases.
• If a CPU Unit error or CPU Unit reset occurs
• If a major fault level Controller error occurs
External safety measures must be provided to ensure safe operation of the system in
such cases.
If there is interference in remote I/O communications or if a major fault level error oc-
curs, output status will depend on the products that are used.
Confirm the operation that will occur when there is interference in communications or a
major fault level error, and implement safety measures.
Correctly set all of the settings in the slaves and Units.
If external power supplies for Units, slaves or other devices are overloaded or short-
circuited, the voltage will drop, outputs will turn OFF, and the system may be unable to
read inputs. Provide external safety measures in controls with monitoring of external
power supply voltage as required so that the system operates safely in such a case.
Safety Precautions
16
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)
Содержание NX1P2 series
