manualshive.com logo in svg

Omron NX1P2 series, Руководство пользователя по оборудованию

Поделиться
Скачать
Omron NX1P2 series Скачать руководство пользователя страница 121

No.1

No.2

No.3

Unit power supply terminals

End
Cover

NX-series NX1P2 
CPU Unit

Unit power supply terminals

Internal

circuits

Internal

circuits

Internal

circuits

Internal

circuits

Internal

circuits

Internal 

power 

supply

circuit

Internal 

circuits

NX Unit power supply

NX bus connector

NX Unit

NX Unit

NX Unit

I/O power supply 
terminals

I/O power supply

(24 VDC, etc.)

Additional I/O 
Power Supply 
Unit

The total power consumption from 
the NX Unit power supply is within 
the NX Unit power supply capacity 
of the CPU Unit.

The total power consump-
tion from the NX Unit power 
supply is within the NX Unit 
power supply capacity.

Additional NX Unit 
Power Supply Unit

Unit power supply

(24 VDC)

Internal 

power 

supply

circuit

Separated by the Additional NX 
Unit Power Supply Unit

○

○

○

○

○

○

NX Unit power supply

I/O power 
supply

Additional I/O Power Supply Unit

The following explains how to use Additional I/O Power Supply Units.
• Connect an external I/O power supply to this Unit to deliver the I/O power to NX Units through the

NX bus, if necessary.

• Supply additional I/O power via this Unit if over 4 A is consumed in total by the I/O circuits of the NX

Units on the CPU Rack and external devices connected to the NX Units.

• Supply additional I/O power via this Unit if the I/O power voltage goes below the voltage levels

specified for the I/O circuits of the NX Units on the CPU Rack or those specified for the connected
external devices.

• Insert this Unit to separate the I/O power supply line if any NX Unit on the CPU Rack is connected to

an external device with a different I/O power supply voltage.

• Insert this Unit to separate the I/O power supply line to prevent noise and other factors from affect-

ing the other NX Units.

l

I/O Power Supply for NX Units through the NX Bus

Some NX Units receive I/O power through the NX bus, and others receive from external devices. If
any NX Unit on the CPU Rack receives I/O power through the NX bus, you need to prepare an
external I/O power supply device. For details on how to supply I/O power to NX Units, refer to the
datasheet included in the user’s manuals for the NX Units.
Insert an Additional I/O Power Supply Unit on the right side of the CPU Unit, as shown below. Con-
nect its power supply terminals to an external I/O power supply device. It supplies I/O power to all
the NX Units through the NX bus.

4 Designing the Power Supply System

4-5

NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)

4-1 Power Supply System

4

4-1-2

 NX-series Power Supply-related Units

Содержание NX1P2 series









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды