Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 577 / 594

Appendix N Keycode Tables and Conversion Rule
561
Keycode Conversion Rules
When you are using the European keyboard, please read the following keycode
conversion rules.
Also, PT Hardware NT21 and NT31-V1/NT31C-V1/NT631-V1/NT631C-V1 and
above are supporting both Keycodes ISO8859/1 and CP437. This section will
describe the rule for Keycode conversion between ISO8859-1 & Latin-US
(CP437) and vice versa.
Above mentioned will be explained in following order.
(1) When the conversion will be performed.
(2) Basic Policy of the Conversion.
(3) How to Convert.
(4) Conversion Rule from ISO8859/1 to CP437.
(5) Conversion Rule from CP437 to ISO8859/1.
(1) When the conversion will be performed.
The conversion will take place during the following cases.
1. By changing to a different keycode from an existing application.
(From <Tools> – <PT Configuration>)
This is only for the NT21 and the NT31-V1/31C-V1/631-V1/631C-V1 and
above.
2. Drag/Drop of Symbols with different keycode.
3. Key input (Old & new models from ISO8859/1-CP437).
(2) Basic Policy
Basic Policy : If the Character is not found in the Target keycode, “?” (063) is
chosen.
(3) How to convert. (Only for the NT21 and the NT31/631 series with “-V1” and
above.)
The way to convert the Keycode will be as follows.
1. Go <Tools> – <PT Configuration>.
2. Change the “Font Type.”
3. Press [OK] Button.
(4) Conversion Rule from ISO8859/1 to CP437.
Mapping tables for the conversion.
This conversion will be performed when you try to make the former model
screen data such as,
NT11S/NT11, NT20S, N30/30C, NT600S, NT620S/620C,
NT31/NT631 series (System program ver.1.0) by using European Key-
board.