Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 102 / 594

5-1 Section Types of Screens, Common Dialog Box Settings and Operations
86
”Simulate Flash” is applied to each screen individually.
To activate this setting, follow the procedure below.
(1) Select “Simulate Flash” from the [View] menu. (or click on the / but-
ton.)
In the [View] menu, the check mark is set to ON and OFF each time it is se-
lected.
When the check mark is displayed, the objects that have Flash or Inverse
Flash attribute show their flashing status.
Each time the “Simulate Flash” button is clicked, it changes as follows:
: Flash status being shown
: Flash status not shown
Lighting and flashing the lamps/touch switches
For lamps and touch switches, it is possible to specify PLC address for lamp set-
ting. Lamps and touch switches light (flash) according to the status of the host bit.
When the PLC address for lamp setting goes to 1 (ON), they light or flash.
(Whether they light or flash is determined by the lamp attribute set to the object.)
With the Support Tool, ON status of lamps and touch switches can be checked on
the screen.
The Simulate ON/OFF setting is applied to all the screens being displayed.
Reference: In case of image lamp, ON state image and dotted line indicating the position of
OFF state image is shown when the state is ON, and OFF state image and
dotted line indicating the position of ON state image is shown when the state is
OFF.
With the NT21 and NT31/631-V2 and above, the contents of a label can be
specified for each ON and OFF state. The display of the label is changed ac-
cording to the status of the lamp or the touch switch.
Display of lamp ON/OFF status may differs between the Support Tool and PT
for the following cases.
ON color when lamps/touch switches are overlapped.
ON color of lamp/touch switch label when using NT30C, NT620C/NT625C.
ON status of lamp/touch switch when overlapping with other object (other than
fixed display)
To activate this setting, follow the procedure below.
(1) Select [Simulate ON/OFF] from [View] menu. (or click on the / button)
In the [View] menu, the check mark is set to ON and OFF each time it is se-
lected.
When the check mark is displayed, the lamps and touch switches show their
ON statuses.
Each time the Simulate ON/OFF button is clicked, it changes as follows:
: Lamp ON status being shown
: Lamp ON status not shown
Redrawing the editing Screen (Refresh)
In case the screen has disrupted during the edition of the screen, Refresh func-
tion will help you redrawing the screen.
Redrawing can be performed as follows:
(1) Select [Refresh] from the [View] menu. The screen will be updated.