Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 491 / 594

Appendix A Data Conversion
475
Status before
Conversion
Status after
Conversion
Error Message Corrective Action
Conventional model
Assume the code is
X.
New model
The code is X –
EA20.
[E]
Library Table Entry
has been con-
verted.
[W]
The code for screen
element [Object
Name] has been
converted from
XXXX to YYYY.
If the code after conver-
sion differs from the li-
brary code to be used,
change the code to the
correct one. (Refer to
8-2 Library Editor .)
New model
Assume the code is
Y.
Conventional model
The code is Y +
EA20 (if the con-
verted code is out-
side the usable
range, the code is
fixed as FA20.)
[W]
The code for screen
element [Object
Name] has been
converted from
XXXX to YYYY.
Correction related to image/library in character strings
When an image/library in a character string is converted between a conventional
and a new model, conversion is executed in the manner shown below due to dif-
ferences in handling of the image/library between them.
Difference
New models:
Insertion of an image/library into a character string is
impossible except for NT21, NT31/631-V2 and later
models in NT20/30/620-compatible mode.
Conventional models: Insertion of an image/library into a character string is
possible.
Conversion result, error message and corrective action
Status before
Conversion
Status after
Conversion
Error Message Corrective Action
With a conventional
model, the image/li-
brary is used in a
character string.
With a new model,
the code is dis-
played like this:
\<!xxxx>.”
(The code after con-
version conforms to
the image/library
code conversion
method.)
[E]
Image Table entry
has been con-
verted.
[E]
String Table: Table
Entry XXXX has in-
valid component
code. It has been
converted from
XXXX to YYYY.
Delete a code in the
character string and
make corrections so that
the character string and
image/library (fixed dis-
play or image lamp) are
overlapped for display or
grouped, allowing the
image/library to be dis-
played in the same way
as a character string.
(Refer to 6-1-7 Grouping
Elements .)
(In case of lamp/touch
switch label, a fixed dis-
play-image goes behind
the label and the display
will not be as desired. In
this case, use an image
lamp instead.)
Correction of graphic display attributes
When a graphic is converted between a conventional and a new model, conver-
sion is executed as shown below due to differences in the display attributes.
Difference
New models:
The inverse attribute is not supported for some kinds
of graphic.
Conventional models: All graphics have inverse attributes.