Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 566 / 594

Appendix K Error Messages
550
Corrective Action Error Message
D Due to length limitation, Input Key –
String Touch Switch is only displaying
part of the label message.
With NT620S, NT620C and NT625C, if a
character string input is selected as the
touch switch function, up to 80 characters
can be set for an input character string.
With NT21, NT31, NT31C, NT631 and
NT631C, however, although up to 80 char-
acters can be set for a label, the limit is 40
characters for an input character string (a
character string that is input using a touch
switch).
F [Fixed Display Mark] – smoothing not
supported. It is ignored.
The mark is automatically displayed with-
out smoothing processing.
I Image Table entry has been converted. If the converted image code differs from
the code of the image data that is to be
displayed, correct the code.
Incompatible PT hardware connected;
communication aborted.
The PT model between the screen data
and the target PT is mismatching on down-
loading/uploading. Check the contents of
PT Configuration.
Input key-window/keyboard screen num-
ber is not within the valid range. Mini-
mum value restored.
Create the window/keyboard screen for a
screen number in the range 1900 to 1979
and convert the window/keyboard screen
number set for the touch switch according-
ly.
L Library Table Entry has been converted. If the converted library code differs from
the code of the library data that is to be
displayed, correct the code.
M Memory access mismatched; commu-
nication aborted.
Target PLC vendor type or PT type is mis-
matching between the Support Tool and
PT hardware. Confirm the Support Tool
and PT side PLC vendor and PT type is
mismatching.
Memory utilization has exceeded the
XXX bytes limit by YYY bytes.
Delete several elements.
Memory utilization has exceeded the
XXX bytes limit by YYY bytes.
Delete several elements and screens.
More than one Numeral Input/Thumb-
wheel are referring to Numeral Table
entry 0.
Set different numeral memory table entry
numbers at the numeral input and thumb-
wheel switch properties.
N Notify Area not specified.
Control Area not specified. Set the PC (PLC) address for the PT sta-
tus control area/PT status notify area after
selecting [Tools] – [PT Configuration].
Number of [Object name] has exceeded
the XXX limit by YYY.
Delete several elements.
[Numeral Input] – Total number of integer
and decimal exceeds limit. It is dis-
carded.
Create the numeral input field again. Cor-
rect the screen data and the program in
the host so that numeric values such as
maximum/minimum check values and an
input value of up to 8 digits will suffice.