Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Скачать руководство пользователя страница 263

Страница: 263 / 594

6-9

Section

Graphs

247

(3) To change the size of a displayed percentage value, double click on the val-

ue.

The properties of the percentage value display are displayed.

Position:

Indicates the display position of the percentage value.

(The reference point is at the upper left corner of the percentage
value.)

Font Type:

Specify the font of a value to be displayed.

Standard, Half Height, Double Width

Scale:

Specify the scale of a value to be displayed.

1 (Equal), 1

2 (High), 2

1 (Wide), 2

2, 3

3, 4

4, 8

Smoothing: Specify whether or not smoothing processing is executed for a

value to be displayed.

Attribute:

The display attribute cannot be set (fixed as standard display).

Color

Foreground: Specify the color of the percentage value.

(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow

Background: Specify the background color of the percentage value display

area.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow

Reference:

A percentage value and other elements cannot be overlapped on a trend

graph.

With a trend graph, a percentage value can be displayed for each line. If there

are too many lines with percentage values and the correspondence between

the values and lines is not clear, use the procedure shown below to check the

line that corresponds to the percentage value.

(1) Select a trend graph.

(2) Select [Edit] (menu bar) – [Edit Object].

Or press Insert key (P122).

The trend graph element enters the edit enabled state and the

marks

surrounding the trend graph change to red.

Содержание NT-SERIES - SUPPORT TOOL FOR WINDOWS V4



















































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NT-SERIES - SUPPORT TOOL FOR WINDOWS V4

Отзывы:

Похожие инструкции для NT-SERIES - SUPPORT TOOL FOR WINDOWS V4

Бренды по названию

Популярные бренды

Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Результаты поиска

Содержание NT-SERIES - SUPPORT TOOL FOR WINDOWS V4

Отзывы:

Похожие инструкции для NT-SERIES - SUPPORT TOOL FOR WINDOWS V4

Бренды по названию

Популярные бренды