Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 249 / 594

6-9 Section Graphs
233
Value: Specify this item if a –100% value is set by a constant; set the value
to be taken for a –100% value.
Note that specification for –100% is valid only when [Display Sign] is selected.
Guidance:
Analogue meters are displayed as follows depending on the settings of
[Shape], [Direction] and [Display sign].
Assumptions
Direction: Clockwise, Display: 30%
Shape
Display
sign
Direction:
Up ( ↑ )
Direction:
Down ( ↓ )
Direction:
Left ( ← )
Direction:
Right ( → )
Quarter
ON
Quarter
OFF
Semi-
ON
Semi
Circle
OFF
Circle
ON
Circle
OFF
Which of [0 to 100%] and [-100 to 100%] analogue meters is displayed should
be selected with the setting for [Display Sign] in the general attributes.
Check mark set:
–100% to 100% display
Check mark not set: 0 to 100% display
A present value is displayed as follows according to the types.
Needle Fill