Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 318 / 594

7-7 Section I/O Comment Table
302
SYSMAC CPT saves ladder program in SSS program (*.SP1) and use this file
to import I/O comment.
I/O comment of CVM1/CV series can not be imported with Support Tool.
With SYSMAC CPT, it is not possible to save ladder program of PLC with “-Z” in
a file with an extension .SP1. Therefore, Support Tool can not import I/O com-
ment of ladder program for “-Z” created with SYSMAC CPT.
Priority in I/O comment
When the I/O comment table at Support Tool has an existing I/O comment or
when both word I/O comment and its bit I/O comment exist in ladder program to
be imported (e.g., 0005CH:DDD, 000512:EEE), priority will be as follows
(smaller number takes higher priority):
(1) Existing I/O comment in Support Tool (in I/O comment table)
(2) I/O comment of bit in ladder program to be imported
(3) I/O comment of word in ladder program to be imported
Example: Existing I/O comments in Support Tool (in I/O comment table)
Word / Bit I/O Comment
0005 AAA
000603 BBB
0007 CCC
I/O comments in ladder program to be imported
Word / Bit I/O Comment
0005 DDD
000512 EEE
0006 FFF
000613 GGG
000708 HHH
0008 III
↓
I/O comments in Support Tool (in I/O comment table) after importing
*: Existing I/O comment in Support Tool (in I/O comment table)