Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 149 / 594

6-1 Section Common Operation
133
Possible memory types and characters are as follows (available only for
NT31/631 models):
Character Memory Type Data Offset
R Register
AL Analog Input
AQ Analog Output
I Discrete Input
Q Discrete Output
T Discrete Temporary
M Discrete Internal
S System Status
SA System Status A
SB System Status B
SC System Status C
G Genius Global Data
: Specification possible : Specification not possible
Input a Data Offset as a 4-digit number (leading zeros can be suppressed).
PLC Vendor: Siemens
Possible memory types and characters are as follows (available only for
NT31/631-V1 models):
Character Memory Type Address Bit
C Counter
DB Data Block
I Input
IW Input
M Bit Memory
MW Word Memory
Q Output
QW Output
T Timer
: Specification possible : Specification not possible
Input a address number as a 4-digit (5 digit in case of DB) number (leading zeros
can be suppressed) and a bit number as a 1-digit number.
Batch address change operation
The set PC (PLC) addresses can be changed into the required addresses in a
batch. Since the change source can be specified as a range, processing such as
changing the address range DM 1000 to DM 01499 to the address range
DM 1800 to DM 2299 is possible at one time. Shifting in bit units is also possible.
Reference: Batch address change operation is possible using either the dialog box displayed
by [Tools] → [Table...] or the function called by [Tools] → [Change Address]. De-
pending on how the address change operation is called, the objective addresses