Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 238 / 594

6-8 Section Touch Switches
222
6-8-6 Copy Setting Touch Switch
Function: Copy setting
Settings
Copy From
Numeral Table: Specifies a numeral table entry for the copy source.
String Table: Specifies a character string memory table entry (string
table) for the copy source.
Code: Specifies copying a constant (numeric data).
Data setting field: Specify the memory table entry number when a numeral
table entry or a character string memory table entry
(string table) is specified. When code is specified, specify
a constant here.
Copy To
Numeral Table: Specifies a numeral table entry for the copy destination.
String Table: Specifies a character string memory table entry (string
table) for the copy destination.
Cursor Position: If this is specified, the numeral input field or the character
string input field, which is the active input objective, is se-
lected for the copy destination.
Data setting field: Specify the memory table entry number when a numeral
table entry or a character string memory table entry
(string table) is specified. If Cursor Position is selected,
this field is invalid.
: Displays the list of numeral/character string memory
table entries (string table).
Guidance
A copy setting touch switch is used in the cases shown below.
Copying the data in a memory table entry to another memory table entry
part3
part2
part1
Character string memory
table (String table)
SET 2
SET 3
part1
SET 1
By setting the data in several memory table entries beforehand, the necessary
data can be copied to the work area as needed.
Note Data copying from a memory table entry to a memory table entry is possible only
between memory table entries of the same type; from numeral memory table
entry to numeral memory table entry, and from character string memory table
entry (string table) to character string memory table entry (string table).