Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 52 / 594

2-2 Section Installing the Support Tool
36
2-2-3 Uninstall
An uninstaller (uninstall software) is supplied with the Support Tool.
If you want to remove the Support Tool from your personal computer, run the
uninstaller to delete the Support Tool program files and installation information.
Note that the data created by the Support Tool is not deleted.
Starting the uninstaller from the Windows start menu
Select “Uninstall NTST” in the same folder where the short-cut to the Support
Tool is stored.
Example: Assuming the short-cut to the Support Tool exists in the Start\Pro-
gram\Omron\NTST4.8E
Select the uninstaller by the following operation.
[Start] → [Program] → [Omron] → [NTST4.8E] → [Uninstall NTST]
After the start up of the uninstaller, follow the instructions displayed on the
screen.
2-2-4 Using the Help File on Windows Vista or Windows 7
Help files with an ”hlp” file name extension cannot normally be used on Windows
Vista and Windows 7. Microsoft, however, provides a tool that will allow you to
use a help file with an ”hlp” file name extension. This tool can be used to enable
accessing the help file.
If you attempt to open the help file while connected to the Internet, the download
page will be displayed automatically.
The tool to access the help file can also be downloaded from the following URL.
http://support.microsoft.com/kb/917607/en–us (Web page last confirmed in
March 2010.)