Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 201 / 594

6-4 Section Data Input
185
string table entry number can be changed by displaying the property setting
dialog box. (It is also possible to change it later.)
A character string input element itself creates a character string setting input
field. It is always used with a control code inputting touch switch (control code
input function) or a system keypad. Data is input to a character string setting
input field using the control code input touch switches and the system keypad,
which are displayed with the character string setting input field.
A A
B AB
Touch
Touch
Touch
→ This is stored
in the charac-
ter string
memory table
(string table).
After creating touch switches (character
string input and control code input) or a
system keypad on the same screen (in-
cludes a pop-up window), pressing the key
allocated label [A] enters [A] in the charac-
ter string setting input field. If the touch key
allocated [B] is then pressed, the input field
shows AB.
Press the key to store the data input to
the input field in the character string
memory table (string table).
A
B
This data input field is created by a character
string input element.
The input field and the control code input touch
switch are automatically correlated. Insertion of a
character string is automatically processed.
Control code
inputting touch
switch
Character string
setting input field
AB
The procedure for creating a character string input touch switch is shown be-
low.
NT30, NT30C, NT620S, NT620C and NT625C
(1) Set the character string input function for the touch switch function.
(2) Set a check mark for the [Label] property in the Label tab.
(3) Click the
Button and input the character string as a label.
A label may be either a character or a character string consisting of multiple
characters. When a touch switch is pressed, the character string set as the
label is set to the character string input field.
When a lamp bit with an I/O comment is set, pressing the Copy I/O Com-
ments button copies the I/O comment as a label.
Property setting for input key-string touch switch
Example
NT31C
Dialog box for
inputting a label
NT21, NT31, NT31C, NT631 and NT631C
(1) Set the character string input function for the touch switch function.