Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 480 / 594

Appendix A Data Conversion
464
However, data conversion between different direct accesses is limited to data of
the same PT model. (e.g., Between NT31-V1 data for OMRON and Mitsubishi A)
When both direct accesses and PT model are different, convert data to that of the
same PT model first (see figures in next page) and then convert the direct access
type.
Conversion between conventional PT models (Between same direct access)
NT620C/NT625C NT620S NT30C NT30
NT600S
NT20 NT20S
Conversion from conventional PT model to new PT model (Between same direct access)
NT620C/NT625C NT620S
NT30C
NT31 (-V1)
NT30
NT31C (-V1)
NT631 (-V1) NT631C (-V1)
NT31 (-V2)
NT631 (-V2)
NT31C (-V2)
NT631C (-V2)
NT20S
NT21
NT11S
NT11
Conversion between new PT models (Between same direct access)
NT631
NT31
NT631C
NT31C
NT631-V1
NT31-V1
NT631C-V1
NT31C-V1
NT631-V1
NT31-V1
NT631C-V1
NT31C-V1
System Program Ver.2.0
System Program Ver.2.1
NT631-V2
NT31-V2
NT631C-V2/V3
NT31C-V2/V3
NT21 NT31-V2
System Program Ver.3.1
System Program Ver.3.1
It is possible to convert the screen data for the lower system program version to
that for the higher system program version freely regardless of the PT models.
(e.g., from “-V1” to “-V2” or from “-V2” to “-V2 (System Ver3.1)).
However, conversion towards the opposite direction is not possible (ex. PT mod-
els with V1
→ PT models without -V1 or higher system program version → lower