Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 303 / 594

7-3 Section Character String Memory Table (String Table)
287
The code of the specified mark data is inserted to the Value field. The mark
itself is not displayed here.
[ Insert Mark ] button
[ OK ] button
Screen
Screen
↑
Mark data
7-3-5 Inserting Image Data into a Character String
To insert image data into an initial value, follow the steps described below.
Note that insertion of image data into a character string is possible only with the
NT30, NT30C, NT620S, NT620C, NT625C, NT21 (NT20/30/620-compatible
mode), NT31/C-V2 (NT20/30/620-compatible mode) and NT631/C-V2
(NT20/30/620-compatible mode).
(1) After specifying the Value field, move the cursor to the position where the
image data is to be inserted.
(2) Click the Button.
The Image Table dialog box is displayed.
(3) Specify the image data in the list of image data.
(4) Click the
Button.
The code of the specified image data is inserted into the Value field. The
image data itself is not displayed here.
[ Insert Image ] button [ OK ] button
Screen
↑
Image data
Screen
Reference: By clicking the Button, an image code with no data can be added to the
list. You can first insert this image to a string and then register the image data
afterward. (Use the image editor to create image data.)