Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 341 / 594

8-1 Section Image Editor
325
[Delete] Deletes the image data of the selected code. When two or . . . . . .
more codes are selected, they can be deleted collectively.
[Close] Closes the image table dialog. . . . . . . .
[Help] Displays Help about the image table dialog box. . . . . . . . .
Specifying a code
To specify a code for operations, click on the objective line (image code).
To specify the continuous codes collectively, click on the first code to be se-
lected and then the last code to be selected while pressing the Shift key.
If you click on a code while pressing the Ctrl key, the code will be selected or
deselected alternately each time it is clicked.
Preview Function
Support Tool provides a preview function that can display the contents of the
selected code.
When two or more codes are selected, the preview of the code selected last will
be displayed in preview window.
The preview window can be switched ON and OFF by clicking the
/
button.
Deleting the image data
To delete an image data, follow the procedure below. Deleted image data will
not be stored to the clipboard and its code itself will be also deleted. When two
or more codes are selected, they will be deleted collectively.
(1) Select [Image Editor] from the [Tools] menu.
The image table is displayed.
(2) Select the code of the image data to be deleted.
When two or more codes are selected, they can be deleted collectively.
(3) Perform one of the following operations.
button → [Delete]
Right-click the selected code → [Delete]
button
Selected code will be deleted after you click the Button in the con-
firmation dialog box.
Cutting/copying the image data
To cut or copy an image data, follow the procedure below. The cut/copied
image data will be stored to the clipboard and can be pasted to the other codes.