Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Руководство по эксплуатации

Страница: 315 / 594

7-7 Section I/O Comment Table
299
table entries, extended I/O input table entries, extended I/O output table entries,
and elements, in the form of list. The displayed comments can be edited.
Reference: If “--” is displayed for PLC Bit Address when its “Ref” is Yes, object without PLC
address exist.
Clicking on enables to know which objects is created without PLC ad-
dress.
7-7-1 Operation Procedure
An I/O comment table entry is displayed by following the operation described be-
low.
When allocating PC (PLC) address by the setting of lamps and touch switches
Click on in the I/O comment field of the properties displayed for each ele-
ment → Specify the edit field → Click on
Example:
Click
[Tools] (menu bar) → [Table] → [I/O Comments] tab → Specify the edit field →
Reference: When only editing an I/O comment of a PC (PLC) address allocated to an ele-
ment, call out the I/O comment table entry from the property dialog box of the
element.
To set an I/O comment for multiple PC (PLC) addresses, select the [Tools]
menu, then select [Table].
Setting
To edit an address or a comment, display the setting dialog box by clicking on
or edit directly on a table entry.
For the operation procedure for , , and , refer to
7-1 Common Operation . (Note that cannot be used if it is displayed by
the operation using an element property.)