Omron E5ZD, Руководство по эксплуатации

Страница: 54 / 157

44
2-3-5 Terminal Blocks for Sensors
This section covers the arrangement and wiring of terminals on the sensor Ter-
minal Blocks. The Terminal Block used for thermocouple inputs differs from the
one used for platinum resistance thermometer inputs. Secure the lead wires so
that they do not make contact with the product. If they touch the product or other
items they may cause damage.
E5ZD-8H
jj
KJM-E E54-TR011 Terminal Block can be used for E5ZD-8H
jj
KJM-E thermocouple
inputs.
The point numbers outside of the parentheses are for connection to CN324, and
the point numbers inside of the parentheses are for connection to CN325.
Do not use terminals 5 through 10 and 15 through 20. Using these terminals may
result in internal damage, so leave them open.
1 3 5 7 9 11 13 15 17 19
+ –
2 4 6 8 10 12 14 16 18 20
+ – + –
+ –
Point 3 (Point 7)
Point 0 (Point 4) Point 1 (Point 5)
Point 2 (Point 6)
Terminal no.
Terminal no.
E5ZD-8H
j
PM-E XW2B-20G4, or XW2B-20G5 Terminal Blocks can be used for E5ZD-8H
j
PM-E
platinum resistance thermometer inputs.
The diagram shows the terminal arrangement for a XW2B-20G5, but the num-
bers are the same for a XW2B-20G4. The point numbers outside of the paren-
theses are for connection to CN324, and the point numbers inside of the paren-
theses are for connection to CN325.
Do not use terminals 7 through 10 and 17 through 20. Using these terminals may
result in internal damage, so leave them open.
1 3 5 7 9 11 13 15 17 19
2 4 6 8 10 12 14 16 18 20
A B B A B B
A B B A B B
Terminal no.
Terminal no.
Point 3 (Point 7)
Point 0 (Point 4) Point 1 (Point 5)
Point 2 (Point 6)
E54-TR011 Terminal
Arrangement
XW2B-20G4 or XW2B-20G5
Terminal Arrangement
E5ZD-8H
jj
M-E Hardware
Section 2-3