Omron CX-PROGRAMMER V9, Руководство по эксплуатации

Страница: 93 / 536

PART 1: CX-Programmer
CHAPTER 2 – Quick Start Guide OMRON
CX-Programmer _Page 10
Full Version
To access the Full Version of CX-Programmer, the appropriate license number must be entered.
The license number may be input at the time of installation or later. To enter an upgrade license number or re-
enter the existing number after installation, follow these steps:
1, 2, 3…
1. Start CX-Programmer, as described above.
2. Click the help button in the toolbar or from the Help menu select the About CX-
Programmer option.
3. In the ‘About CX-Programmer’ dialog click the License button.
4. A dialog is displayed that allows a new license number to be entered. Read the warning
message, enter the appropriate license number and click OK.
5. When a correct license number is entered, CX-Programmer must be restarted to gain full
functionality.
Introducing CX-Programmer Projects
The information within a CX-Programmer project consists of ladder program(s), operands,
required PLC memory contents, IO tables, expansion instructions (if applicable) and symbols.
Each CX-Programmer project file is separate and is a single document.
CX-Programmer can only open a single project at a time. However, it is possible to deal with
many project files by using CX-Programmer at once.
A CX- Programmer project has a .CXP or .CXT file extension. (Normally the .CXP file is
used, and is a compressed version of the .CXT file).
Once the project itself is created the desired PLC and symbol information can be defined. For a full discussion
of PLCs, refer to the
CX-Server - PLC Tools User Manual .
The CX-Programmer Environment
This chapter describes how to manipulate the different views of the main window. Use this
chapter to develop an understanding with the layout of CX-Programmer and to customize it
according to specific requirements.