Omron CX-PROGRAMMER V9, Руководство по эксплуатации

Страница: 150 / 536

PART 1: CX-Programmer
OMRON CHAPTER 4 – Reference
CX-Programmer _Page 67
For advanced users, it is possible to paste symbols from another application into a symbol table. This can be
done from any application that supports a text format – for example a spreadsheet. Refer to
Chapter 5 -
Advanced Topics for further information.
Use the following procedure to copy or move symbols.
1, 2, 3… 1. Select a symbol, or symbols in the symbol table. More than one symbol can be selected by
pressing Shift and selecting another item to extend the selection or by pressing Ctrl and
selecting another item to add to the selection.
2. Select the Copy button from the toolbar to copy the item, or the Cut button from the
toolbar to move the item.
3. Select a symbol table to move the items.
4. Select the Paste button from the toolbar to paste the symbol or symbols. A Paste
operation can be performed several times without copying again.
Note: If a program or part of a program (i.e. selected rungs or sections) are copied between
programs, then the symbols used within the program are copied to the new program.
Validating Symbols
The Validate Symbols can be selected from the context sensitive menu. When Validate Symbol (Selected Item)
is selected, the symbol table, where the cursor is, will be checked. Validate Symbol (ALL) will check all the
symbol tables in the PLC, where the cursor is.
The option performs the following validation checks.
1, 2, 3…
1. The data of each symbol in the selected symbol table outputs a warning message in the
output window if any invalid symbols are found.
2. Each symbol for duplicate addresses, in the selected symbol table, and outputs a warning
message (including the symbol names) in the output window if any are found.
3. To see if any symbols, in the selected local symbol table, are overriding symbols defined
in the global symbol table and outputs a warning message in the output window if any are
found.
4. To see if any duplicated symbol names are defined in the symbol tables, and if any are
found they are output into the output window.
5. To see if any Auto-Allocated addresses have been created that do not have addresses
assigned to them and if any are found they are output into the output window as an error.
Delete Unused Symbols
Any defined symbols in the symbol tables (both Global and Local) that are not used in the program, can be
deleted by selecting
Delete Unused Symbols from the menu. Select areas to delete symbols in the Select area to
delete dialog. For symbols used in the Watch window, PLC Memory component, or Datatrace/Timechart
Monitor component, will not be counted as used symbols. Therefore, these symbols will be deleted from the
symbol tables.
Sharing Symbols with Other Applications
Some OMRON applications may be able to share symbol definitions with other packages. CX-Programmer
supports this feature.
In order to allow sharing of symbols, it is necessary to link a CX-Server file with the project, which holds a copy
of the desired symbols. This is set up using the Project Properties dialog. Once this is done, it is necessary to
indicate which symbols are to be shared. Only global symbols may be linked with other applications. Refer to
Chapter 5 - Advanced Topics for further information.
Adding Symbols
It is possible to add a symbol from several places – from the project workspace, within a symbol table or a
program window. In each case, the Insert Symbol dialog is used.