manualshive.com logo in svg

Omron CX-PROGRAMMER V9, Руководство по эксплуатации

Омрон CX-PROGRAMMER V9 - программа для программирования контроллеров Омрон. Операционное руководство доступно для скачивания бесплатно на manualshive.com. Здесь вы найдете полное руководство пользователя, которое поможет вам освоить все возможности этого программного обеспечения.

Поделиться
Скачать
background image

PART 1: CX-Programmer

 

OMRON 

CHAPTER 4 – Reference

 

 
 

 

 CX-Programmer _Page 93 

Note:

  The PLC-PT Simulation can also be started from the CX-Designer. Refer to the

 CX-Designer 

Operation Manual

 (Cat. No. V099) for details on starting the simulation program from the 

CX-Designer. 

Note:

  This functionality is not supported for CP1E CPU Units. 

PLC Error Simulator 

During simulation of ladder programs with CX-Programmer Ver. 7.2 or higher (CX-One version 2.1 or higher), 
fatal and non-fatal PLC errors can be generated in a special window to debug ladder program sections that detect 
errors. 

The error-processing programs can be debugged easily in a separate window. 

1.  Connect the simulator online in the CX-Programmer, or start the integrated simulation. 

2.  If the CX-Programmer is used, select 

Simulation – PLC Error Simulator

 to start the PLC error simulator 

program. 

3.  The PLC Error Simulator Window will be displayed. Select the errors that you want to generate, and press 

the General Error Button or Clear Error Button to change the status. 

Note:

  When the simulator program is stopped, the errors generated up to that point will be cleared. 

Working On-line 

 

CX-Programmer permits the connection of the PLC to the computer through the project, and 
subsequent additional features once the PLC is on-line. Select the 

Work On-line

 button from 

the toolbar to connect to the PLC. 

Auto Online to a PLC 

When maintaining a PLC, CX-Programmer can start monitoring the program of the connected PLC with a 
toolbar button, after CX-Programmer is started. A PC must be connected to a PLC. 

Use the following procedure to go on-line to the PLC automatically. 

1, 2, 3… 

 

1. Select 

the 

Auto Online

 button from the toolbar. A dialog is displayed showing the PLC 

type and the network settings of the connected PLC, which CX-Programmer is searching. 
When CX-Programmer successfully finds the PLC information, it automatically goes on-
line and transfers all the data from the PLC, for example, programs, expansion function 
(if available), PLC settings, IO table (if available), symbol tables and comments. 

 

2. Select 

the 

Select Serial Port

 option from the PLC Auto Online menu to change the serial 

port when Auto Online. The default serial port is set to COM1. 

 

Note:

  When the Auto Online connection is executed using CX-Programmer Ver.7.2 (CX-One Ver.2.1) or 

higher, the available personal computer serial ports are automatically detected (automatic detection 
of computer serial ports function). If a serial port than can be connected online is found, the 
automatic connection is made from that serial port. 

Auto Online - EtherNet/IP Node Online 

You can automatically and easily connect online to a PLC when using CJ2 CPU Units connected to nodes on an 
EtherNet/IP network. 

Connection Types 

♦ 

Connecting to the Target PLC When Connected to a PLC through a USB Cable 

♦ 

Connecting to the Target PLC through an Ethernet Port on a Computer 

Note:

  When running the CX-Programmer on Windows XP (SP2 or higher), Windows Vista, or Windows 

7 and connecting online to a PLC via EtherNet/IP for the first time, the settings of the Windows 
Firewall will need to be changed. Refer to 

Appendix B EtherNet/IP Connections from Windows XP 

(SP2 or Higher), Windows Vista, or Windows 7

 in 

Part 1: CX-Programmer

 for details on making 

the changes. 

Содержание CX-PROGRAMMER V9

























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CX-PROGRAMMER V9

Navitar 12X Zoom Instruction Manual preview
12X Zoom
Бренд: Navitar Страницы: 23
3Com 3C19250 - USB Ethernet Network Interface... User Manual preview
3C19250 - USB Ethernet Network Interface...
Бренд: 3Com Страницы: 16
Adobe 718659340025 - InDesign CS - PC Printing Manual preview
718659340025 - InDesign CS - PC
Бренд: Adobe Страницы: 122
MACROMEDIA FLASH MX 2004 - FLASH LITE AUTHORING GUIDELINES FOR THE I-MODE... Manuallines preview
FLASH MX 2004 - FLASH LITE AUTHORING GUIDELINES FOR THE I-MODE...
Бренд: MACROMEDIA Страницы: 48
Intergraph InterSite Quick Start Manual preview
InterSite
Бренд: Intergraph Страницы: 46
Adobe PHOTOSHOP CS 2.0 - SCRIPTING GUIDE Manual preview
PHOTOSHOP CS 2.0 - SCRIPTING GUIDE
Бренд: Adobe Страницы: 91
Emerson Smart Wireless Navigator Reference Manual preview
Smart Wireless Navigator
Бренд: Emerson Страницы: 22
Emerson Site Manager User Manual preview
Site Manager
Бренд: Emerson Страницы: 130
M-Audio Wayoutware TimewARP 2600 User Manual preview
Wayoutware TimewARP 2600
Бренд: M-Audio Страницы: 49
TC Works ASSIMILATOR User Manual preview
ASSIMILATOR
Бренд: TC Works Страницы: 20
nordic edge ASA 5500 Installation Manual preview
ASA 5500
Бренд: nordic edge Страницы: 49
FujiFilm FINEPIX EX3.1 Quick Start Manual preview
FINEPIX EX3.1
Бренд: FujiFilm Страницы: 55
Juniper VXA2000 Series Quick Start Manual preview
VXA2000 Series
Бренд: Juniper Страницы: 14
Icom RS-RP2C Setup Instructions preview
RS-RP2C
Бренд: Icom Страницы: 16
Novell SERVICE DESK - INSTALLATION V6.1 Installation Manual preview
SERVICE DESK - INSTALLATION V6.1
Бренд: Novell Страницы: 18
Paradyne 8995 Release Note preview
8995
Бренд: Paradyne Страницы: 1
Xerox SMARTsend 2.0 Brochure preview
SMARTsend 2.0
Бренд: Xerox Страницы: 4
Garmin Pilot User's iOS User Manual preview
Pilot User's iOS
Бренд: Garmin Страницы: 178

Бренды по названию

Популярные бренды

Загрузить еще бренды