Olivetti DP, Техническое руководство, Страница: 84 / 180

Windows Troubleshooting
4-34
❖
DP Technical Information Guide
• Default Gateway: is set correctly (if used).
Check the LPR and AppSocket settings and verify they are set as
desired. These settings are not critical to operation but provide
some security and usability features.
2
Verify the PDL in the Ethernet Menu area of the Configuration
Sheet:
• Interpreters: PCL or PostScript (depending on your driver).
3
From the server desktop use the right mouse button and select
Network Neighborhood then with the left mouse button select
Properties from the cascade menu.
4
The Network dialog will appear. Select the Protocols tab.
5
Check the list of installed network protocols for the following item:
• TCP/IP Protocol
6 If you have elected to run CentreWare DP you must also have
loaded Novell NetWare Client 32 and an NWLink IPX/SPX
Compatible transport protocol component. You may also discover
printers that have been assigned a TCP/IP address.
7
As required, click Add and install any components not listed and
restart the system.
8
Once rebooted, select the Start button and Settings, then select the
Printers folder. The printers window will appear.
9
Verify that you have loaded and selected the correct driver for your
printer.
10
Right mouse click on the printer icon and select Properties.
11
Select the Ports tab.
12 Verify that the IP Address in the Print to the following port list is
the same as the one from the Configuration Sheet. If necessary
reselect the TCP/IP number used for your printer.
13
Start an application and send a print job to the printer. If printer still
does not print contact your Customer Support representative.