Olivetti DP, Техническое руководство

Страница: 66 / 180

Windows NT 4.0 Network
4-16
❖
DP Technical Information Guide
Windows NT 4.0
Network
Your printer can be installed on a Windows NT network using one
of three methods:
• TCP/IP protocol
• DLC/LLC protocol
• AppleTalk protocol
The Preliminary Steps given below must be accomplished for all
printers regardless of the protocol that is being used. Then, the
Quick Install Steps will detail the installation based on the protocol
used on your network.
Preliminary Steps 1 Connect appropriate cabling from printer to network.
2 Print the Configuration Sheet. Details are in the section “Print the
Configuration Sheet” (page 2-11). Retain this sheet for reference.
3 Proceed to the Quick Install Steps for your network protocol.
Quick Install Steps
(TCP/IP Protocol)
1 At the Desktop, right mouse click the Network Neighborhood icon
and select Properties.
2 Click on the Protocols tab and verify that the TCP/IP protocol has
been loaded.
3 Select the Services tab and verify that “Microsoft TCP/IP Printing”
is loaded.
4 If this software is not present, install it using the documentation
provided by Microsoft. Then return to this document.
5 Open the Control Panel and double-click the Printers icon.
6
Double-click Add Printer.
7
The Add printer Wizard starts.
8 Verify that My Computer is selected and click Next>.
9
Click Add Port.
10
From the list that appears select LPR Port.
11 Click New Port.