Olivetti DP, Техническое руководство, Страница: 58 / 180

Windows 95 Peer-to-Peer Network
4-8
❖
DP Technical Information Guide
Windows 95
Peer-to-Peer
Network
Requirements • A printer with appropriate cabling connected to your network.
• A workstation with Windows 95 software installed.
• Working knowledge of Windows 95.
Step-by-Step Setup
(Peer-to-Peer, NetBEUI)
1
Load your DP CD.
2 Print a Configuration Sheet..
3
Check the Configuration Sheet and verify that the NetBEUI
protocol is enabled and note the NetBEUI name, the service name,
and the hardware address.
4 Run the Setup program located in the
<drive_letter>\instal\utility\WFW95P2P folder on your CD. Follow
the prompts and enter information as necessary. The setup program
will require you to restart Windows.
5
At the Welcome screen click Next>.
6
The Destination Location screen will appear, showing where the
files will be installed. Change the directory with the Browse button,
or click Next>.
7
A new screen will appear requesting a backup directory. Change the
directory with the Browse button, or click Next>.
8 A new screen will appear requesting a spool directory. Change the
directory with the Browse button, or click Next>.
9 A new screen will appear requesting a new folder’s name. You may
type a new folder name, or select an existing folder from the list,
then Click Next>.